MaxProtect 86 sq ft | 39"x39" | 20mm

Note: Corner and edge pieces are not included — please add them separately if needed.

MaxProtect: Strong, safe, versatile - gym flooring for the highest demands

• Odor-free thanks to 100% natural rubber
• Tested for harmful substances by the three leading institutes in Germany
  Verifiable with test reports
• Layer 1: EPDM rubber, 2 mm thick fine granules for a firm grip and a premium look
• Layer 2: 13 mm to 23 mm thick coarse granules (depending on the version) for high cushioning and noise reduction

AirCushion with Additional Air Channels

• In addition to the SolidProtect mat, it features MattConnect and AirChannel technology
• AirCushion technology with round air channels provides: additional shock absorption of the weight during drops, ventilation of the underside of the mat, and noise reduction
  

MattConnect: Unshakable Hold for Your Floor

• MattConnect: 16 plug connectors per mat ensure a matrix bond across the entire gym flooring
• Invisible from above, the fixing elements hold the panels together
• They prevent the mats from shifting, even when moving equipment across the training area
• The mat ends can be fitted with corner pieces that attach seamlessly to the edges of the mat
• This creates a smooth transition between the mat and the floor, preventing the formation of high edges
• This reduces tripping hazards and makes it easier to maneuver weight benches or movable weight racks
• The end pieces thus not only provide a visually appealing solution but also increase the safety and functionality of the flooring

Step-by-Step Guide to Cutting and Laying the Gym Flooring:

1. 1. Safety first: Put on suitable work gloves to avoid cuts.
   2. Choosing the right tool: a sharp carpet or utility knife and a guide rail.
   3. The surface should be flat and level. You should also use cardboard, for example, to protect the floor.
   4. Measure precisely and mark the area to be cut with chalk or lightly score it with the knife.
   5. Position the guide rail and pull the knife firmly through the mat without lifting it. The cut should be made in a single motion with even pressure. Repeat this process until the mat is completely cut through. Spread the mat apart bit by bit while cutting to reduce friction. If needed, moisten the knife slightly with soapy water to help it glide better. Note, however, that this also increases the risk of slipping.
   6. Any gaps between the mats can simply be covered with black tape, preventing dust and dirt from getting in.

Item ID