11 sq ft SolidProtect 15 mm (5/8") Gym Flooring
EPDM rubber | 15 mm (5/8") thickness | High unit weight | Fine-grain surface | 0.8 mm grain size | expert-tested
Available from: 29 Oct 2026
Extreme breakage resistance
High Material Density
Two protective layers
Floor & temperature protection
Versatile application
EPDM rubber for outstanding surface properties
- Expertly tested by Germany's largest testing institute
- Low odor
- High tear resistance at 4.4 MPa
- Resistant to drops of sharp-edged or thin Weight Plates
- Drop tests with 200 lb Bumper Plates carried out from a height of 19.5"
- High material density of 14.5 lb/ft3
- High unit weight - therefore no fixing required
- UV-resistant
- Suitable for radiant floor heating
- Temperatures between -8°F and 185°F cause no deformation of the structure
Two protective layers for maximum protection
- Layer 1: fine granules with 0.8 mm grain: slip resistance, non-crumbling, does not absorb water or sweat droplets
- Layer 2: coarse granules with 3 mm grain: soft and shock-absorbing, sound-insulating, high elasticity
- The lower layer is especially pure and free of dyes and leaves no marks on parquet, tiles or laminate
- These mats can also be used on radiant floor heating without any problems
Demanding garage gyms and fitness rooms
- Designed for fitness facilities geared toward moderate weight training and bodyweight exercises (small gyms, hotels, schools, personal trainers and rehab facilities)
- Outdoor training facilities
- Dimensions 39"x39"
- 39"x39" results in minimal seam formation and is therefore ideal for large rooms
STEP-BY-STEP INSTRUCTIONS FOR CUTTING OUR GYM FLOORING
- Safety first: Put on suitable work gloves to avoid cuts.
- Choosing the right tool: a sharp carpet or utility knife and a guide rail.
- The subfloor should be flat and level. In addition, you should use e.g. cardboard boxes to protect the floor.
- Measure precisely and mark the area to be cut with chalk or lightly score it with the knife.
- Place the guide rail and pull the knife firmly through the mat without lifting it. The cut should be made in one motion and the pressure applied should be even. Repeat this process as many times as needed until the mat is completely severed. Spread the mat apart piece by piece as you cut to reduce friction. If necessary, moisten the knife a little with soapy water to help it glide better. Note, however, that this also increases the risk of slipping.
- Any gaps between the mats can simply be covered with black tape to prevent dust and dirt from getting in.
SolidProtect 15 mm (5/8") Material
| Main Component | EPDM |
|---|---|
| Layer 1 | Fine granulate, 0.8 mm grain size |
| Property | slip-resistant, waterproof |
| Layer 2 | Coarse granulate, 3 mm grain size |
| Property | cushioning, shock-absorbing |
Features
| Size per Mat | 39"x39" (11 sq ft) |
|---|---|
| Thickness | 15 mm (5/8") |
| Color | Black |
| Odor Neutrality | almost odor-neutral |
| Weight per Mat | 33 lb (3.1 lb per sq ft) |
| Tolerances | 1% |
Protection
| Expert Report | Expert-tested for harmful substances, prohibited chemicals or questionable dyes |
|---|---|
| REACH | 100% Free of Harmful Substances per REACH EU standard |
| Impact Sound Reduction | 34 db |
| Slip Resistance | Level R10 • highly slip-resistant per DIN 51130 |
| Fire Behavior | Efl (DIN EN 13501-1) / B2 (DIN 4102-1) - normally flammable |
| UV Resistant | Yes |
Interlocking System
| Connection System | Loose |
|---|---|
| End Caps | Optional |
Application
| Outdoor-suitable: | Yes |
|---|---|
| Suitable for underfloor heating: | Yes |
Delivery & Assembly
| Shipping | Freight delivery on pallet |
|---|---|
| Appointment | Email announcement with date selection |
Service & Return Policy
| Return policy | 100 days after purchase |
|---|---|
| Organization of return | Carrier pickup on preferred date |
Included Services
| Training Plan and Equipment Support | 1h Online Consultation Included |
|---|---|
| Quick Troubelshooting Service | 7-Day Remote Help Service |
Warranty & Certification Gym Flooring
| Warranty on material stability or deformation | 5 years |
|---|
Accessories
| Solidprotect 20 mm (3/4") | Gym Flooring 39"x39" |
|---|
Delivery, Logistics & Customer Support Information
Detailed information about shipping coverage, processing times, transport insurance and brand store availability.
Schedule a free appointment for a personal consultation with one of our experts.
Our customer service is available Monday to Friday, from 8:00 AM to 4:00 PM, to assist you.
Which countries do you deliver to?
US Standard shipping is free to the 48 contiguous states and Washington, D.C. For Alaska, Hawaii, U.S. territories and APO/FPO addresses, email service@atleticagear.com with your cart and address and we quote the shipping cost. We can’t deliver to PO boxes.
How long does delivery take?
In-stock orders leave our Corona, California warehouse within 1 - 2 business days. Parcels arrive in 1 - 6 business days depending on your state; freight deliveries on a pallet (power racks, machines, large sets) take 5–10 business days and are scheduled with you by appointment. You receive tracking by email.
How much does shipping cost?
Shipping costs are calculated based on destination, order size and service level. Final shipping costs are shown transparently before payment.
Is the shipment insured?
Yes. Every shipment is insured in transit. Please inspect your delivery upon receipt and report visible transport damage immediately.
Where is your brand store located?
Our team can provide the nearest showroom and partner locations for your region. Contact support for a current list.


